Haltech Platinum PRO Plug-in Mitsubishi EVO 9 MIVEC Kit - also suits EVO 8 MR 6

(Product Code: HT055064)


  • Direct plug and play replacement of the OEM ECU, no re-wiring necessary.
  • Uses the cars factory sensors
  • Supports Sequential Injection (peak and hold) and Direct fire ignition
  • Windows 2000, XP, Vista, Windows 7 compatible software
  • Real time programming, instant hesitation free adjustment while engine is running
  • Fully user definable 32 x 32 mapping
  • Tuning via Volumetric Efficiency (VE), Injection time or Lambda Correction (MAF
  • Diagnostic Trouble Code Storing & Check Engine Light Controll
  • (Access through laptop only )
  • Selectable onboard internal MAP sensor rated to 150kPa (up to 1.5 Bar or 22psi boost)
  • Wideband ?auto tuning? using user definable target AFR table
  • USB and CAN Communication Port

Factory Outputs:

  • 4 x Fuel Injector outputs
  • 2 x Ignition outputs
  • Tacho , MIVEC Control, Boost Control, Intercooler Sprayer,Idle Control,
  • Thermo Fan (variable speed), Fuel Pump (variable speed)
  • A/C Clutch Relay, Check Engine Light

Factory Inputs:

  • MAF Sensor, Throttle Position Sensor, Knock Detection Sensor
  • Oxygen Sensors, Coolant Temperature Sensor, Vehicle Speed Sensor
  • Air Temperature Sensor, MAP Sensor (JDM and USA Only),
  • Power Steering Switch

Expansion I/O*:

  • 2 x Analogue Voltage inputs
  • 2 x Analogue Temperature inputs
  • 4 x Digital pulsed outputs

*Optional auxiliary harness required to be purchased Haltech Part # HT040003


  • Knock Control
  • Long Term Fuel Trim
  • ACF On - Base Tables
  • Closed Loop O2 Control
  • Decel Cut
  • Over Boost
  • Closed & Open Loop Boost Control
  • Gear Setup
  • Transient Throttle Enhance

Correction Tables -  Fuel  Ignition  Boost:

  • Cranking
  • Air Temp Target Correction
  • Coolant Temperature Correction
  • Map Correction
  • Zero Throttle Gear Correction
  • Cylinder Trim
  • TPS Correction
  • Generic Correction 1*
  • Generic Correction 2*
  • Gear Correction
  • Post Start
  • Air Temp Duty Correction
  • Post Start

* Generic Correction tables have user definable axis

Data Logging: 448Kb of onboard data logging, Storage for approx 40 minutes at 10 logs per seconds, 6 channels of data
Max 20 channels logging capability
Tune can be password protected in software
Rugged anodized aluminum casing

Power Requirements:

Source: 8.6 to 16.5 Volts DC
Consumption: 530mA @ 12Volts DC

Physical Dimensions:

ECU Dimensions Length: 154mm (174mm with MAP nipple)
Width: 158mm Height: 42mm Weight: 680g (1.5 lb)

Applications: Mitsubishi Evolution 9 / Mitsubishi Evolution 8 MR 2004 ? 2007 Engine Codes: 4G63 Transmission: Manual Only (Automatic not supported) Not Supported: Immobiliser

The Platinum Pro Plug-in Mitsubishi EVO 9 Kit includes: Pro Plug-in ECU, USB Cable, Programming Software CD, Quick Start Guide, Instruction Manual (on CD)

$2147.38(inc GST)

Haltech Platinum PRO Plug-in Mitsubishi EVO 9 MIVEC Kit - also suits EVO 8 MR 6 - Click to enlarge

<< Previous Page

Internet Payment Gateway by